Output |
Frequency: |
10 MHz |
Level: |
+4 dBm ±3
dB, 50 ohms |
External Reference
Input |
Frequency: |
5 or 10 MHz |
Level: |
+4 dBm ±3 dB, 50 ohms |
Automatic Input Select Level: |
-2.0 to +0.5 dBm |
Phase Noise L(f): |
1 Hz:
-85 dBc/Hz
10 Hz: -117 dBc/Hz
100 Hz: -132 dBc/Hz
1 kHz: -142 dBc/Hz
10 kHz: -147 dBc/Hz |
Stability |
Aging: |
5 x 10-9/day after 24 hours operating
5 x 10-8/year, second
year, typical |
Phase Noise L(f): |
10 Hz: -120
dBc/Hz
100 Hz: -145 dBc/Hz
1 kHz: -160 dBc/Hz
10 kHz: -165 dBc/Hz |
Temperature: |
±5 x 10-8, -30 to +75șC, ref +25șC |
Subharmonics (5 MHz): |
-30 dBc, maximum |
Type 1 Loop Characteristics: |
BW: <1 Hz
<5 minute to within ±1 x 10-9
of input |
Electrical Tuning: |
±1 x 10-6, ±5 VDC |
|
Power
Requirements |
Warm-Up Power: |
6 watts for 5 minutes |
Total Power: |
3.5 watts at +25șC, typical |
Supply Voltage: |
+12 or +15 VDC |
Status
Pin |
External Reference Loss: |
TTL, Low = loss of reference, not locked
|
Out of Lock Alarm: |
TTL, High = unlocked
|
Mechanical |
Crystal: |
10 MHz SC-Cut |
Dimensions: |
1.75 x 2.938 x 0.6" housing
2.25 x 3.40" footprint with brackets |
Connectors: |
SMA output, SMA input, Feed-thru capacitors |
Packaging: |
Solder sealed steel can |
|